Victron EasySolar-II GX: All-in-One Solar Setup
Updated 16 September 2026 · By SolarNevs Research Desk, Dealer surveys + verified sources · 1 source · Method ↗
Key Takeaways
- The basis of the product is an extremely powerful sine inverter, battery charger and transfer switch in a compact casing..
- Model range hierarchy: EasySolar-II GX 230V 24/3000/70-32 MPPT 250/70 48/3000/35-32 MPPT 250/70 48/5000/70-50 MPPT 250/100.
- Front diagnostic panel: A backlit 2 x 16 character display screen shows system parameters..
- Dedicated battery CAN network: The BMS-Can connection allows connecting of compatible 500 kbps CAN-bus BMS batteries..
- Comprehensive cloud telemetry: Ethernet and WiFi connections allow for local and remote system monitoring, as well as connection to Victron's free VRM portal for long term system performance information..
- Auxiliary load shedding channel: Besides the usual uninterruptible output (AC-out-1), an auxiliary output (AC-out-2) is available that disconnects its load in the event of battery-only operation..
- Massive polyphase scalability: The unit can be connected with others and configured for three-phase output. It is possible connect up to 6 sets in parallel in three phases, to a total of 18 units..
- Supply current limit protection: The product can supply a huge charging current. This implies heavy loading of the AC input. Therefore a maximum current can be set..
- High voltage solar MPPT input: Maximum PV open circuit voltage 250V.
- Industrial steel casing: Steel, blue RAL 5012 Protection category IP22.
- Heavy-gauge AC wiring terminals: Screw terminals 13 mm2 (6 AWG).
All-in-One Architecture & Integrated Subsystems
The EasySolar-II GX integrates a MultiPlus-II inverter/charger, a SmartSolar MPPT charge controller, and a Venus GX controller into a single pre-wired enclosure, eliminating external DC interconnects and simplifying ESS installations.
The Victron EasySolar-II GX is an all-in-one solar system combining a MultiPlus-II, MPPT 250V solar charger, and GX controller (Models: 24/3000 | 48/3000 | 48/5000 | IP22 Steel Blue RAL 5012):
- Integrated MPPT Solar: MPPT 250/70-250/100, 250V PV Open Range, 70A / 100A Charge, Pre-Wired Internal.
- Inverter / Charger: 3kVA / 5kVA Inv., 187-265VAC Input, Dual AC Outputs, PowerControl.
- GX Controller: 2x16 LCD Disp, 500kbps BMS, Ethernet/WiFi, VRM Portal.
Installation Rules & Electrical Connections
- Solar PV Array Sizing: Design solar strings ensuring the Maximum PV open circuit voltage 250V is never exceeded under cold conditions.
- Lithium Battery BMS Communication: Terminate battery CAN-bus leads ensuring The BMS-Can connection allows connecting of compatible 500 kbps CAN-bus BMS batteries..
- Mechanical & AC Wiring: Wall-mount the Steel, blue RAL 5012 Protection category IP22 enclosure and wire AC lines into the Screw terminals 13 mm2 (6 AWG).
Dual AC Output Routing & GX Telemetry
The EasySolar-II GX delivers comprehensive load management and remote monitoring:
- Dual AC Bus Routing: Provides uninterrupted UPS power on AC-out-1 while Besides the usual uninterruptible output (AC-out-1), an auxiliary output (AC-out-2) is available that disconnects its load in the event of battery-only operation..
- Local & Cloud Monitoring: Features A backlit 2 x 16 character display screen shows system parameters. while Ethernet and WiFi connections allow for local and remote system monitoring, as well as connection to Victron's free VRM portal for long term system performance information..
- System Foundation: Functions reliably because **The basis of the product is an extremely powerful sine inverter, battery charger and transfer switch in a compact casing.**.
PowerControl & 3-Phase Scalability
- AC Supply Protection: Manages input load because The product can supply a huge charging current. This implies heavy loading of the AC input. Therefore a maximum current can be set..
- Commercial System Expansion: Supports industrial installations since The unit can be connected with others and configured for three-phase output. It is possible connect up to 6 sets in parallel in three phases, to a total of 18 units..
- Model Hierarchy: Delivers flexible options across EasySolar-II GX 230V 24/3000/70-32 MPPT 250/70 48/3000/35-32 MPPT 250/70 48/5000/70-50 MPPT 250/100 hardware.
Technical Specifications & Sizing Summary
Parameter | Engineering Rating | Design Significance |
|---|---|---|
Inverter System Topology | The basis of the product is an extremely powerful sine inverter, battery charger and transfer switch in a compact casing. | Pre-wired all-in-one solar and energy storage hub |
Model Lineup Configurations | EasySolar-II GX 230V 24/3000/70-32 MPPT 250/70 48/3000/35-32 MPPT 250/70 48/5000/70-50 MPPT 250/100 | Scalable 24V/48V 3kVA-5kVA power options |
Front LCD Status Screen | A backlit 2 x 16 character display screen shows system parameters. | Direct local readout of power, battery, and errors |
Lithium Battery Interface | The BMS-Can connection allows connecting of compatible 500 kbps CAN-bus BMS batteries. | Direct closed-loop CAN communication with smart lithium |
Network Telemetry Link | Ethernet and WiFi connections allow for local and remote system monitoring, as well as connection to Victron's free VRM portal for long term system performance information. | Dual-connectivity remote monitoring to VRM cloud |
Auxiliary AC-out-2 Output | Besides the usual uninterruptible output (AC-out-1), an auxiliary output (AC-out-2) is available that disconnects its load in the event of battery-only operation. | Automatic shedding of non-essential heavy appliances |
3-Phase Multi-Unit Scaling | The unit can be connected with others and configured for three-phase output. It is possible connect up to 6 sets in parallel in three phases, to a total of 18 units. | Industrial three-phase scalability up to 18 units |
PowerControl Current Limiting | The product can supply a huge charging current. This implies heavy loading of the AC input. Therefore a maximum current can be set. | Prevents tripping of limited shore/generator supplies |
Solar MPPT Voltage Limit | Maximum PV open circuit voltage 250V | High voltage string sizing headroom for MPPT |
Enclosure Chassis Rating | Steel, blue RAL 5012 Protection category IP22 | Durable powder-coated steel casing for indoor plants |
AC Wiring Terminals | Screw terminals 13 mm2 (6 AWG) | Heavy screw terminals for high-current pass-through |
Add a battery at a surveyed price
Installers quote supply and fitting of the battery on this page for your existing or new system.
How this pays for the site: installers pay SolarNevs a fixed introduction fee when we pass them a genuine enquiry. They cannot pay to appear higher, and our surveyed prices are published before any introduction. You can also take our dated price tables straight to any installer.
Frequently asked questions
What integrated components and product model options define the EasySolar-II GX?
The EasySolar-II GX combines a powerful sine inverter, battery charger, transfer switch, MPPT solar charger and GX monitoring in one compact casing (August 2026). Documented 230V models include the 24/3000/70-32 and 48/3000/35-32 (each with an MPPT 250/70) and the 48/5000/70-50 model (with an MPPT 250/100).
What monitoring screens, battery CAN interfaces, and cloud telematics are built in?
A backlit 2x16-character display shows system parameters, and the BMS-Can port connects compatible 500 kbps CAN-bus BMS batteries (August 2026). Ethernet and WiFi provide local and remote monitoring, including Victron's free VRM portal for long-term performance data.
What output load routing, generator protection, and physical specifications apply?
The system provides **Besides the usual uninterruptible output (AC-out-1), an auxiliary output (AC-out-2) is available that disconnects its load in the event of battery-only operation.**, ensures **The product can supply a huge charging current. This implies heavy loading of the AC input. Therefore a maximum current can be set.**, supports scaling where **The unit can be connected with others and configured for three-phase output. It is possible connect up to 6 sets in parallel in three phases, to a total of 18 units.**, operates with **Maximum PV open circuit voltage 250V**, built with **Steel, blue RAL 5012 Protection category IP22** and **Screw terminals 13 mm2 (6 AWG)** (August 2026).
References
- Victron Energy: EasySolar-II GX Manual — accessed 31 August 2026
Related guides
More from what to buy — and how not to get cheated.