Victron EM24 Meter: Ethernet & RS485 Setup
Updated 16 September 2026 · By SolarNevs Research Desk, Dealer surveys + verified sources · 1 source · Method ↗
Key Takeaways
- The Victron EM24 Ethernet is a standard device to measure the power and energy of a 3-phase application. Its data will be displayed on a GX device and our VRM portal..
- High-speed ESS grid control: As a Grid meter and used as control input for an ESS System..
- Solar generation tracking: To measure the output of a PV Inverter..
- Backup power metering: To measure the output of a AC Genset..
- Sub-circuit power logging: As an AC meter to measure a dedicated AC load circuit..
- Direct LAN network connectivity: A wired ethernet connection to the local network in such a way that the GX device can reach it..
- Venus OS software role selection: The configuration option of either Grid Meter, PV Inverter, Generator or AC Meter is set in the GX device..
- Voltage sensing protection rule: Note that wherever the word "Fuse" appears in the diagrams, a 315 mA fuse should be used, if required by local law..
- Solar current direction wiring rule: When used to measure a PV Inverter, terminals 1, 4 and 7 should face the PV inverter to ensure correct direction of current and power..
- Single-phase jumpered topology: Single-phase, single function EM24 connected as a single-phase, single function grid meter.
Ethernet Modbus TCP Architecture & System Operating Roles
The EM24 Ethernet connects directly to local area networks, streaming revenue-grade 3-phase electrical data to Cerbo GX and Ekrano GX controllers via Modbus TCP without requiring USB-to-RS485 adapters.
The Victron EM24 Energy Meter is a 3-phase revenue-grade energy meter with Ethernet Modbus TCP, supporting operating roles as a Grid Meter (ESS), PV Inverter meter, Genset meter, or AC Sub-Circuit Load meter:
- AC Phase Terminals: 3-Phase Direct In, Term 1,4,7 to PV, Single-Phase Jumper, Direct Line Meter.
- Voltage Fusing: 315 mA Fuses, Voltage Reference, Local Law Compl., Safety Fusing.
- Network Link: Ethernet LAN, Modbus TCP, Cerbo GX / OS, VRM Portal.
Installation Rules & Electrical Wiring
- Grid Meter Role: Land incoming utility feeds ensuring The configuration option of either Grid Meter, PV Inverter, Generator or AC Meter is set in the GX device. operating As a Grid meter and used as control input for an ESS System..
- PV Inverter Sizing: Wire terminals so that When used to measure a PV Inverter, terminals 1, 4 and 7 should face the PV inverter to ensure correct direction of current and power..
- Voltage Protection: Protect sensing circuits ensuring Note that wherever the word "Fuse" appears in the diagrams, a 315 mA fuse should be used, if required by local law..
Local Area Network Interfacing & System Functions
The EM24 integrates seamlessly into the Victron ecosystem:
- Wired Ethernet Connection: Establishes A wired ethernet connection to the local network in such a way that the GX device can reach it..
- Multi-Role Functionality: Operates To measure the output of a PV Inverter., To measure the output of a AC Genset., or As an AC meter to measure a dedicated AC load circuit..
- Single-Phase Flexibility: Configures as Single-phase, single function EM24 connected as a single-phase, single function grid meter.
- Comprehensive Capability: Operates reliably because The Victron EM24 Ethernet is a standard device to measure the power and energy of a 3-phase application. Its data will be displayed on a GX device and our VRM portal..
Technical Specifications & Sizing Summary
Parameter | Engineering Rating | Design Significance |
|---|---|---|
Primary Meter Function | The Victron EM24 Ethernet is a standard device to measure the power and energy of a 3-phase application. Its data will be displayed on a GX device and our VRM portal. | High-precision 3-phase grid and generation measurement |
ESS Grid Control Role | As a Grid meter and used as control input for an ESS System. | Enables dynamic zero-export and phase balancing in ESS |
Solar PV Metering Role | To measure the output of a PV Inverter. | Dedicated metering of AC-coupled solar generation |
Generator Metering Role | To measure the output of a AC Genset. | Real-time generator output and energy logging |
Dedicated Subcircuit Role | As an AC meter to measure a dedicated AC load circuit. | Sub-metering of EV chargers and heavy machinery |
Network Interface Link | A wired ethernet connection to the local network in such a way that the GX device can reach it. | Direct LAN Modbus TCP connection without USB converters |
Software Role Selection | The configuration option of either Grid Meter, PV Inverter, Generator or AC Meter is set in the GX device. | Flexible operating role assignment in Venus OS |
Voltage Sense Protection | Note that wherever the word "Fuse" appears in the diagrams, a 315 mA fuse should be used, if required by local law. | Protects unmetered voltage reference lines |
PV Current Orientation | When used to measure a PV Inverter, terminals 1, 4 and 7 should face the PV inverter to ensure correct direction of current and power. | Ensures accurate solar energy direction logging |
Single-Phase Operation | Single-phase, single function EM24 connected as a single-phase, single function grid meter | Flexible wiring topology for single-phase installations |
Add a battery at a surveyed price
Installers quote supply and fitting of the battery on this page for your existing or new system.
How this pays for the site: installers pay SolarNevs a fixed introduction fee when we pass them a genuine enquiry. They cannot pay to appear higher, and our surveyed prices are published before any introduction. You can also take our dated price tables straight to any installer.
Frequently asked questions
What is the primary role and telemetry display interface for the EM24 Ethernet?
**The Victron EM24 Ethernet is a standard device to measure the power and energy of a 3-phase application. Its data will be displayed on a GX device and our VRM portal.** (August 2026).
What system operating roles and network communication options are supported?
It configures **As a Grid meter and used as control input for an ESS System.**, **To measure the output of a PV Inverter.**, **To measure the output of a AC Genset.**, or **As an AC meter to measure a dedicated AC load circuit.** utilizing **A wired ethernet connection to the local network in such a way that the GX device can reach it.** where **The configuration option of either Grid Meter, PV Inverter, Generator or AC Meter is set in the GX device.** (August 2026).
What wiring rules, protective fuses, and single-phase topologies apply?
Installations require that **Note that wherever the word "Fuse" appears in the diagrams, a 315 mA fuse should be used, if required by local law.**, ensure that **When used to measure a PV Inverter, terminals 1, 4 and 7 should face the PV inverter to ensure correct direction of current and power.**, and support **Single-phase, single function EM24 connected as a single-phase, single function grid meter** (August 2026).
References
- Victron Energy: EM24 Ethernet Manual — accessed 31 August 2026
Related guides
More from what to buy — and how not to get cheated.